Difference between revisions of "WorkMan HVS - IP Protocol"
From WorkManSoft Wiki
Jump to navigationJump to search (→About) |
|||
| Line 5: | Line 5: | ||
The protocol works over TCP/IP and is linebased with CR+LF (#13#10) as a end of command terminator. The second parameter is always a sequencenumber. | The protocol works over TCP/IP and is linebased with CR+LF (#13#10) as a end of command terminator. The second parameter is always a sequencenumber. | ||
WorkMan HVS can work both as a client and as a server. | WorkMan HVS can work both as a client and as a server. | ||
| + | |||
| + | HS = Hotel System | ||
| + | HVS = Our system (Hotel Växel System) | ||
== List over commands == | == List over commands == | ||
Revision as of 13:29, 31 August 2012
About
This protocol is our own protocol and can be used if no other protocol is in place.
The protocol works over TCP/IP and is linebased with CR+LF (#13#10) as a end of command terminator. The second parameter is always a sequencenumber. WorkMan HVS can work both as a client and as a server.
HS = Hotel System HVS = Our system (Hotel Växel System)
List over commands
Welcome
| Command | WELCOME |
| Direction | HVS to HS |
| Mandatory | No, only HVS in servermode sends this. |
| Structure | WELCOME; |
| Response | none |
| Example sender | WELCOME;1 |
| Example response | |
| About | Sends a welcome from the HVS server to connecting client. |
Kepp-alive
| Command | ALIVE |
| Direction | HVS to HS |
| Mandatory | No, only HVS in clientmode sends this. |
| Structure | ALIVE;<sequencenumber>; |
| Response | OK;ALIVE;<sequencenumber received> |
| Example sender | ALIVE;1 |
| Example response | OK;ALIVE;1 |
| About | Sends a welcome from the HVS server to connecting client. |
